flashtree 2Pcs AC 110V 120V 220V 230V 10000W Motor Speed Controller Electronic Voltage Regulator 10000W High Power SCR Dimming Attemperation Thermoregulation Board

by DORHEA
$19.99
SKU B09J4FN52L

Brand: DORHEA

Features:

  • 10000W resistance load limit power, room temperature for a long time is recommended to be used within 5000W, voltage regulation: AC 10V to 230V (adjust begin 20V), this is an easy-to-use voltage regulator that can control the brightness or speed of the light. Use a new bidirectional high-performance thyristor. The current can reach up to 100 A, and solves the problem of overcurrent caused by small resistance when the induction cooker cable is cooled.
  • 10000W SCR voltage regulator standard aluminum housing safe and durable super power electronic voltage regulator. It is widely used in resistive loads, such as heating wires, incandescent lamps and most (not all) single-phase AC motors.
  • 10000W speed controller operating voltage AC 110V-230V. Maximum power 10000W (resistive load), long term operating power 7000W. Voltage adjustable from AC 0V to near input voltage. Full copper 75A super large current terminal. The trigger circuit is unique, the control voltage is accurate and there is no hysteresis, the resistive load is turned off to 0, and after starting, it will be adjusted from 10V, adjust to the supply voltage that is closest to the input.
  • Connect the SCR voltage regulator to the front of the circuit of the electrical appliance. The ''input' and """"output"""" lines are connected (do not distinguish between zero line and firewire). Rotate the potentiometer rotary lever to achieve light and dark dimming, speed regulation, voltage regulation and temperature regulation, easy to use.Rotate the potentiometer rotary lever to achieve light and dark dimming, speed regulation, voltage regulation and temperature regulation, easy to use.
  • Regulator is not suitable for brushless motor. The load should not exceed the specified maximum power. Pay attention to the temperature for the first use. If the temperature is high (more than 80 ℃), please enhance heatsink. Otherwise, the module and the appliance will be burned out. If connect to inductive load or Capacitive load, the power must leave Two-thirds (2/3) margin.

Part Number: 14853-1

Details: Operating Voltage: AC 110V-230V Maximum Power: 10000W (resistive load) Long Term Operating Power: 7000W Voltage Adjustment: Adjustable from AC 0V to near input voltage The trigger circuit is unique, the control voltage is accurate and there is no hysteresis, the resistive load is turned off to 0, and after starting, it will be adjusted from 10V, adjust to the supply voltage that is closest to the input. Application: Electric furnace, water heater, the lamps and lanterns that move light, small AC motor, solder iron temperature control and so on (Inductive or capacity load power should be reduced, the voltage regulator is equipped with two way high power thyristor, needn't to add any component can be used , very convenient and practical) . Package Included: 1 x AC 110V-220V 10000W SCR voltage regulator Note: The product needs to be connected to the load and adjust the potentiometer to detect the output voltage change. The load should not exceed the specified maximum power. Pay attention to the temperature for the first use. If the temperature is high (more than 80 ℃), please enhance heatsink. Otherwise, the module and the appliance will be burned out. If connect to inductive load or capacitive load, the power must leave two-thirds (2/3) margin.

EAN: 0701715489233

Package Dimensions: 15.7 x 5.1 x 2.6 inches

You recently viewed

Clear recently viewed