SpaGuts 25-150-0010 Bath Heater Kit, 1.5KW, 110V, 5.5" x 1.5", Vacuum




  • Stainless Steel 5.5" x 1.5" in-line heater; 1.5kw 110V Incoloy heater element; Built-in vacuum switch to activate heating
  • Automatic smart thermostat (104 degrees F limit); Reversible mounting; Heater on light
  • 1.5", and 1.0" pipe fittings included*; Pair of 1.5" Heater O-Ring Gaskets included; 110V 60Hz 3ft NEMA cord
  • Copper Bonding Wire included, 36"; Installation and Operation Manual; 2-year limited limited warranty from the original purchase date
  • UL Recognized for safety standards

Release Date: 22-10-2018

model number: 25-150-0010

Part Number: 25-150-0010

Details: Spa Guts Universal Inline Bath Heater Kit, 1. 5KW 110V. This is the "Short Version" 5. 5 x 1. 5 inch in-line style bathtub heater, which can be installed on either the pressure or suction end of your bathtub pump depending on selection. This bath heater is normally meant for use on 1. 5 inch plumbing, but can also be used on 1. 0 inch plumbing when using the fittings that are provided. Inside diameter is approximately 2. 375 inch for the black heater split nuts. The Vacuum Switch model bath heater is also a replacement option for the following model numbers: SG101-15UV-S, PH101-15UV-S, 26-0014M-RA, CT100, C3B94P1-E012JUZ . To install this bathtub heater on the suction side of your bathtub pump. The use of a bath heater helps to eliminate the rapid cooling that occurs during the operation of your whirlpool bath, providing you a continuous source of hot water and extending the pleasure of your jetted bath experience. This bath heater is normally for use in jetted bathtubs up to 70 gallons. NOTE: This bath heater is designed to maintain the current bath water temperature in the tub, and is not meant to heat water from cold to hot.

Package Dimensions: 10.0 x 6.0 x 4.0 inches

You recently viewed

Clear recently viewed