Texas Instruments NE555P (with SOCKETS) Single Precision Timer, NE555N NE555 Single Bipolar DIP8 (Pack of 12)

SKU B0754V77KM

Brand: Texas Instruments / AMPHENOL ICC (FCI)


  • 12 NE555P with 12 of Sockets Texas Instruments
  • Timing From Microseconds to Hours
  • Astable or Monostable Operation
  • Adjustable Duty Cycle
  • TTL-Compatible Output Can Sink or Source up to 200 mA

Part Number: NE555P With Sockets

Details: These devices are precision timing circuits capable of producing accurate time delays or oscillation. In the time-delay or monostable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the astable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor. The threshold and trigger levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset, and the output goes low. When the output is low, a low-impedance path is provided between discharge (DISCH) and ground. The output circuit is capable of sinking or sourcing current up to 200 mA. Operation is specified for supplies of 5 V to 15 V. With a 5-V supply, output levels are compatible with TTL inputs. What's included: 12 Pieces of NE555P 12 Pieces of Socket

Package Dimensions: 5.8 x 2.0 x 0.6 inches

You recently viewed

Clear recently viewed