Universal 12V DC Motor Control Radio Remote Control 10A Range 100m 200M Motor Controller Forward+Reverse+Stop Switch Linear Actuators Linear Motor

Brand: Lejin

Features:

• Application: It can be used in rolling blinds, rolling doors, projection screens, awnings, pumps, winches, conveyors or other appliances and equipments with DC motors, it can remote control DC motor rotates in the positive or reversal direction.
• Wireless control, easy to install. You can rotate a motor in the positive or reversal direction and stop-function with the transmitter (remote control) from any place within a reliable distance.
• You could turn on / off the receiver with transmitter (remote) from any location within a reliable distance. The wireless radio signals can pass through walls, floors and doors. The remote control has a range up to 100m-200m outdoors.
• The product uses non-directional radio coding technology. You can use two or more units in the same place. Reliable control: The receiver only works with the transmitter which use same code. One/several transmitters can control one/several receivers simultaneously. So you don’t have to worry about interference
• Controller power consumption: standby 10mA /working current 35mA. Two control mode can reach your requirement [ Latch (1 key on / other key off)+Momentary (Press and hold -> On; Release -> Off ) Package Include: 1* Receiver (with cover) ; 1* Remote Control (with battery, If you need extra remote control , please tell us. )

Binding: Electronics

model number: Lejin-02

Part Number: Lejin-02

Details: Package Include: 1* Receiver (with cover) 1* Remote Control (with battery, If you need extra remote control , please tell us. ) Item specifics Frequency:433 MHz Channel:1 Wireless Communication:RF Use:Auto door, window,lifting equipment,entrance access, up and down controller ,alarm system industrial control and security etc. Product voltage:Dc9v to 12v Product Load:within 60w Output Current ≤10A Frequency:433mhz Remote distance:About 100M-200M(in the open field) Standby current:10mA Working current:35mA Controller size:3.9inch*1.7inch*1.14inch Independent coding, many sets will be not interference of each other Output State: It is adjusted by the Jumper on the Receiver Board Control mode Description Momentary Press the button▲ , the Motor Forward,Release is Stop. Press the button ▼, the Motor Reverse,Release is Stop. Latched Press the button ▲, the Motor Forward,Press Button ■ is Stop. Press the button ▼, the Motor Reverse,Press Button ■ is Stop. Set control mode Momentary----------Jumper "2&3" Pin Latch----------------Jumper "1& 2" Pin notice You must turn off the power when you set control mode through jumper Do not overload

EAN: 0691608462224

Package Dimensions: 5.5 x 3.9 x 3.1 inches